The engine out of order in rotation
Appearance Account for the occurrence Means of fix a breakdown

  • The main shaft is not rotational after starting
  • The circuit was open.
  • The fuse had blown.
  • The control knob was not open.
  • Check up on circuit,connect with the mains.
  • Connect with the fuse.
  • Tum the control knob.
  • The machine was in buss,but the main shaft is not rotational after starting
  • The main shaft was rusty.
  • Cut off the electricity supply at once,open the main engine to remove the rusty.
  • Return to factory to overhaul the engine.
  • Pushed down the handle but the maim shaft is not rotational after starting.
  • The main shaft was rusty.
  • The clutch was wear and tear.
  • The seat of handle was not to end.
  • Opened the case of engine to remove the rusty and lubricate.
  • Change the clutch.
  • Heavily press the handle,so the cable will be embrace.
  • Retum to factory to overhaul the engine.
  • Felt leak on metal casing by best pencil(electrostatic induction)
  • Not have use the three-hole socket and three-pin plug of single phase with protective grounding.
  • The ground wire of socket was not be connect.
  • Use the three-hole socket and three-pin plug of single phase with measure of protective grounding.
  • When there is not the above-mentioned socket and plug,please take the measure of protective grounding.
  • Temperature of the surface of main engine was high.
  • Environmental temperature is high.
  • The time of working of continuation is the longest.
  • This is not breakdown and could continue working.
  • Rest for a while then continue working.


The appear trouble in operation of clean
Appearance Account for the occurrence The means of fix a breakdown
  • The cable only rotated but it is not advance.
  • Your machine is not all automatic.
  • Please consult the directions of hand or power drain cleaning machine to operate.
  • Please use the all automatic drain cleaning machine.
  • The cable or drilling tool be stuck in the pipe.
  • The agglomeration was hardly or there was narrow crack in pipe.
  • Slowly pull out the cable with practice of pulling and pushing in concert with clockwise and counterclockwise rotation of motor.look out:the counterclckwise time was not longer,don't haul.
  • Could use the flexible cable to try.
  • The cable advance or retreat of cable was difficult.
  • The distance of pipe was longer or there was many elbow in pipe.
  • Strengthen the force to pull or to push the cable.
  • Change the course or andle of cable.
  • please use the drilling tool of double-olive head or flexible cable.
  • The cable broke in pipe.
  • The usage was wrong.
  • Pull out the cable of break by recovery spiral drill with connective cable.